The installation process of the cam divider-body
Release time:
2021-09-17
The cam divider is a mechanism that realizes intermittent motion. It has the characteristics of high indexing accuracy, stable operation, large transmission torque, and self-locking during positioning. Next, the installation process of the cam divider-the installation of the body, is introduced. There is also the installation of input and output shafts, which we will mention in the next article.
1. The divider is a high-precision dividing mechanism obtained by processing and correct assembly adjustment. The user shall not adjust, disassemble or assemble without authorization.
2. Confirm whether the installation surface of the divider is damaged. If there is damage, use oilstone to repair it.
3. Correct the position of the input and output shafts, add positioning pins, and tighten the screws evenly.
4. The splitter bears the action of pulsating load moment, and the installation must be very firm.
The indexer manufacturer mentioned that because the installation surface of the divider is relatively perpendicular or parallel to the input and output shafts, the installation base of the equipment must ensure that the input and output shaft directions of the divider and the input and output required by the equipment The direction is coaxial. It cannot be skewed or eccentric. Otherwise, it will not only affect the output accuracy, but also seriously damage the divider. Because at this time, the divider is in an abnormal stress state.
The installation process of the cam divider introduced above-the body, let us know about it.
recommend Content
Share
Manufacturer of rotary table and cam indexer
Zhucheng HonePan Automation Machinery Plant.
Fax:+86-536-6329789
Zhucheng HonePan Automation Machinery Plant.
No.8 Hone Pan Road Zhen Xi Industrial Park Huanghua Town Zhu Cheng City Shandong Province, China.
Follow Us