The method of splitter rotation and stop control
Release time:
2021-09-17
The divider has a driving angle and an angle of repose. When the divider runs to the angle of repose, the output shaft of the divider does not move. Depending on how long the divider stops, the divider can use the divider inverter to control the start of the motor. It can be used with stop, splitter or clutch, splitter or power off motor, splitter brake. Next, the manufacturers of precision intermittent cam dividers simply share the method of stop and turn control:
The indexing is realized by a divider, but after the divider plate has rotated 60 degrees, the divider will enter the angle of repose. The angle of repose of the divider generally has a range. As long as the plate is stopped within the range of the divider, the plate does not move. of.
The general divider can see the position of the angle of repose from the input axis. There is a mark on the drawing of the divider that "the half of the angle of repose is the standard position of the keyway". Take the divider as the standard. Make a sensor for the divider. The opening of the sensor for the divider can be the same size as the angle of repose of the divider, so it is easy to distinguish. Splitter points. The splitter or slightly larger, the splitter can be sensed in advance. Need to look at the speed of the divider to control it.
Let’s take a look at the above-mentioned method of splitter rotation and stop control.
recommend Content
Share
Manufacturer of rotary table and cam indexer
Zhucheng HonePan Automation Machinery Plant.
Fax:+86-536-6329789
Zhucheng HonePan Automation Machinery Plant.
No.8 Hone Pan Road Zhen Xi Industrial Park Huanghua Town Zhu Cheng City Shandong Province, China.
Follow Us